You will be the Senior Signal Integrity / Power Integrity Electrical Engineer responsible for ensuring the electrical performance of high-speed and mixed-signal printed circuit board assemblies across MFC programs. The engineer performs pre- and post-layout SI/PI analysis, defines PCB stack-ups and routing constraints, supports board sign-off, and partners with program design teams as a recognized subject-matter expert. This role contributes to the MFC SI Center of Excellence and helps establish design standards, modeling flows, and best practices that scale across the Circuit Card Design portfolio.

What You Will Be Doing
You will be responsible for:

• Perform pre-layout SI/PI analysis on high-speed interfaces (DDR, PCIe, SerDes, Ethernet, USB) — channel modeling, eye-diagram and jitter budgets, termination strategy.
• Define and review PCB stack-ups, controlled-impedance and length-matching rules, and via/breakout strategies in coordination with PCB designers.
• Perform post-layout SI/PI verification including S-parameter extraction, IBIS-AMI link simulation, eye-diagram/eye-mask sign-off, and crosstalk/SSO analysis.
• Develop and validate PDN designs — decoupling networks, plane resonance, DC IR-drop, and AC impedance — meeting voltage tolerance and noise budgets.
• Support lab measurement and correlation: VNA, TDR/TDT, BERT, high-bandwidth oscilloscope probing, eye-diagram capture, PDN impedance measurement.
• Contribute to MFC design standards, guidelines, and reusable IP — author internal design rules, modeling templates, and best-practice guides.
• Mentor junior engineers and serve as the SI/PI point of contact during design reviews from concept through verification.

Why Join Us
Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus. If you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you.

We offer flexible work schedules to comprehensive benefits investing in your future and security,

Further Information About This Opportunity:
This position is in Orlando. Discover more about our Orlando, Florida location.

MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must be able to obtain a secret clearance.
Basic Qualifications:

• Bachelor's degree in Electrical Engineering (or closely related technical discipline) from an accredited institution.
• 5+ years of professional experience in signal integrity, power integrity, high-speed digital PCB design, or closely related electrical analysis role.
• Hands-on, demonstrated experience with at least one industry SI/PI tool suite: Siemens HyperLynx, Ansys (SIwave / HFSS / Q3D), or Cadence Sigrity (PowerSI, PowerDC, Sigrity SI).
• Demonstrated experience performing pre- and post-layout SI/PI analysis with documented sign-off responsibility on PCB designs.
• Working knowledge of PCB stack-up design, controlled-impedance routing, and power distribution network (PDN) design.
• Experience with at least one high-speed interface family: DDR3/4/5, PCIe (Gen3 or above), SerDes ( 10 Gbps), Ethernet (1G+), or USB 3.x.
• U.S. Citizenship is required.
• Ability to obtain a Secret security clearance.

Desired Skills:

• Master's degree in Electrical Engineering with focus on signal integrity, electromagnetics, RF, or high-speed digital design.
• 8+ years of SI/PI experience in defense, aerospace, semiconductor, or high-reliability commercial electronics.
• Hands-on experience with the Siemens Xpedition EDA flow — schematic capture, constraint-management, layout integration with HyperLynx.
• Strong familiarity with IBIS / IBIS-AMI modeling, model extraction, and model validation.
• Lab measurement experience with VNA ( 40 GHz), TDR, BERT, real-time scopes ( 20 GHz), and high-bandwidth differential probing techniques.
• Knowledge of EMI/EMC pre-compliance analysis and design practices for mil-aero environments.
• Familiarity with MIL-STD-461 (EMI/EMC), MIL-STD-810 (environmental), MIL-STD-704/1275 (power quality) or equivalent customer electrical standards.
• Cross-domain co-design experience (thermal, mechanical, RF).
• Demonstrated experience mentoring junior engineers or supporting technical working groups.
• Active Secret clearance

Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Part-time Remote Telework: The employee selected for this position will work part of their work schedule remotely and part of their work schedule at a designated Lockheed Martin facility. The specific weekly schedule will be discussed during the hiring process.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Experienced Professional
Business Unit: MISSILES AND FIRE CONTROL
Relocation Available: Possible
Career Area: Hardware Engineering
Type: Full-Time
Shift: First