employer cover photo
employer logo
employer logo

Challenge Manufacturing

Engaged Employer

Challenge Manufacturing reviews

2.6

31% would recommend to a friend

(316 total reviews)

28% positive business outlook

Challenge Manufacturing has an employee rating of 2.6 out of 5 stars, based on 316 company reviews on Glassdoor which indicates that most employees have an average working experience there. The Challenge Manufacturing employee rating is 25% below average for employers within the Manufacturing industry (3.5 stars).

Reviews by job title

316 reviews
1.0
Feb 14, 2016

Unable to communicate

Anonymous employee
Recommend
CEO approval
Business Outlook

Pros

New production equipment, state of the art.

Cons

They treat all levels of people as robots. Turn over rate exceeds 4 times per year overall. No effective training program, all about rules and nothing about responsibilities or respect for the individual.

avatar
Challenge Manufacturing Response
10y
Thank you for your feedback. It is critical that that all team members are being treated with respect and fairness. Please contact the local HR representative or the Challenge Hotline at hotline@challenge-mfg.com or call 616-735-6523 to discuss in greater detail what you have experienced at Kansas City Manufacturing. We will have hotline investigators look into the matter to ensure that all team members are being treated with respect and fairness. Thank you.
3.0
Feb 10, 2016

Some good,some bad

Anonymous employee
Recommend
CEO approval
Business Outlook

Pros

There are very good employees there. When hired you get on the job paid training for a week.

Cons

Its a very competitive work environment and lots of overtime. Seniority doesn't matter. I went back through a temp agency and was told I would get hired back in after 320 hours now they are saying it could be a year if at all. 3rd shift gets blamed for a lot of things because most of the people are from temp services. I was really hoping to get hired back in but not sure if it's gonna happen.

avatar
Challenge Manufacturing Response
10y
Thank you for your feedback. The Company is always striving to improve its communication methods and coordinating with contract agencies to ensure transparency with Team Members. We constantly provide all agencies information about employment and the Company’s expectations. Please reach out to our Hotline at hotline@challenge.com or call 616-735-6523 to address the concerns in more detail. We strive to provide equal opportunities and treatment for all employees. Thank you.
1.0
Jan 26, 2016
Recommend
CEO approval
Business Outlook

Pros

Decent pay (when your paycheck isn't messed up, which for many employees it is on a regular basis).

Cons

When I first applied for a this job, I was told my schedule would be from 6:30 a.m. to 3:00 p.m., Monday-Friday. I was overjoyed, as I haven't had a job that left my weekends free for five years, and I was looking forward to finally getting to spend some time with my family. Also, the $12 per hour wages for the work seemed very reasonable, considering how easy the work was, as was the $18 overtime compensation for any hours worked over the initial forty. Unfortunately, Challenge Manufacturing Plant 7 in Kansas City, Missouri is utterly incapable of producing the daily quota of Chevy Malibu parts that its customer, General Motors, expects from it. They have a seven-year contract with GM and desperately want to renew it after it expires (although I think it will be a miracle if they even keep the one they have). Therefore, we are forced to work from 5:30 a.m. to 4:30 p.m., seven days a week, in an effort to produce those totally unattainable part quotas. On my first day of work I was told by my immediate supervisor that she hadn't had a single day off in three months. Workers drop like flies here. The turnover rate is phenomenal. The reason for Challenge's dismal production (besides the fact that their "management" is the most inept, out-of-touch group of sycophantic slave drivers I've ever had the displeasure of working for) is that their robots, especially the ones that assemble the main components, break down constantly. I've worked days where the robots were down all day and didn't start working until a half-hour before shift change. Four hours of downtime is quite normal, while we usually have a minimum of two hours of downtime while the robots are getting fiddled with by the overworked (and amazing) maintenance team. What's so infuriating about this is that the sociopathic management (which keeps getting shuffled around and replaced) blames the workers for the poor production, rather than the robots. They've cut our breaks down to what must be illegal durations for the hours worked. In an eleven-hour day, we get two ten-minute breaks and one half-hour lunch (the latter of which, as with most places of work, we aren't paid for). In an eight-hour day, we only get one ten-minute break and a lunch. Now, check this out: we aren't allowed to leave our work stations until the exact minute our break starts, and we have to be back at our stations on the last minute of our break. And this plant is HUGE, alright? It takes about two-and-a-half minutes just to walk to the break area. So basically you get a six-minute break and a 26-minute lunch. And during that lunch, you aren't allowed to go anywhere, even though you're not getting paid for that time. There's a Wendy's next door, but you're not allowed to go. And to make their Draconian measures complete, Challenge has even forbidden its employees to smoke, even outside, even in their own cars, during the work day. Henry Ford would have been proud of these authoritarians. And then when we run back to our stations to be back on time, we end up sitting there for an hour anyway, because the robots are down. Another mind-blowing thing I've seen here is the Quality Control process. There are people who all day grab completed parts off the conveyor belt, draw a few lines on them with a blue magic marker, and put them into bins to be shipped out to the GM plant. This is what constitutes Quality Control at Challenge. I once had to work at a QC station, and the person I was working with showed me where to draw the lines on the part. When I asked her what the marks meant or what I was supposed to be looking for, she just shrugged and said, "I don't know. It's something about the weld or something." A friend of mine worked for a day at another QC station, and when he found a messed-up weld on a part, he went to the guy who usually worked that station and asked what to do with it. The guy had no idea. He'd been working there for a month and had never really looked hard enough at a part to find any faults with it. He had to go ask his supervisor. Considering they are producing car parts and families will be driving in these cars, you'd think maybe QC should be taken seriously, right? I could say a lot of other things that I've seen go on there but this isn't the forum for that. Let's just say Challenge Manufacturing is a company with absolutely no morals or scruples, and they'd better hope GM doesn't look to closely into their dealings.

avatar
Challenge Manufacturing Response
10y
Thank you for your feedback. Please note that Kansas City Manufacturing is a new facility launching brand new production. The management team is dedicated to providing the best experience for everyone, including the implementation of additional off-shifts to help alleviate the demands of our customer early in the launch process.. To respond to your other comments, all break and lunch times allotted are legal, and in fact exceed what is required by law for the company to provide. Team Members will soon be able to utilize their scheduled break time to smoke in designated areas once the smoke patio is opened. The Quality Control Process is a standard that our OEM customers require, and the components being checked are part of those Quality Requirements. Team Members are required to attend a four-day training sessions, which highlights what to look for in a good and bad part along with many other aspects of the job. All Team Members receive proper training before starting their job in order to protect themselves, others, and our customers, as well as working alongside more senior team members for a required period of time. Kansas City Manufacturing strives to provide fair and equal treatment to all employees. Please feel free to address your additional concerns to our Hotline at hotline@challenge-mfg.com or call 616-735-6523. We will have hotline investigators look into the matters. Thank you.
Viewing 301 - 303 of 316 Reviews

Glassdoor has 332 Challenge Manufacturing reviews submitted anonymously by Challenge Manufacturing employees. Read employee reviews and ratings on Glassdoor to decide if Challenge Manufacturing is right for you.